27.jpg

 

Maximize throughputs for hard-to-filter samples
  • Available with single layer glass fiber or with a multi-layered glass fiber prefilter over glass fiber media.
  • The GxF multi-layered prefilter provides two to four times the throughput of standard glass fiber prefilter devices, allowing for quick and easy filtration of your most difficult-to-filter samples.
  • Reduce clogging. Use alone or in series with final membrane filter to increase flow rate and throughput.
  • Ensure broad chemical compatibility with polypropylene housing.
  • For extremely heavy particulate loads, use the larger 37 mm size.
  • HPLC certified for low levels of UV-absorbing extractables.
  • For high throughput prefiltration of particulate-laden samples.
  • Can be used alone or in series with another Acrodisc syringe filter.
  • 25 mm Acrodisc PSF syringe filter is available in robotic-compatible AutoPackTM packaging for Caliper** Prelude*, TPWII, and Multi-Dose* systems, and Sotax dissolution systems.
**Caliper Life Sciences was previously Zymark Corporation.
 

 

Materials of Construction
Filter Media: Borosilicate glass fiber
Housing: Polypropylene

Pore Size
40 - 1 µm
Effective Filtration Area
3.9 cm2
Sample Volume
<150 mL

Inlet/Outlet Connections
Female Luer-Lok* inlet, standard male slip luer outlet
 
 
Typical Hold-up Volume
(with air purge)
< 125 µL
Maximum Operating Temperature
82 °C (180 °F)

Maximum Operating Pressure
4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF) and 2.1 bar (210 kPa, 30 psi) at 82 ºC (180 ºF)
Typical Water Flow Rate
650 mL/min at 1.0 bar (100 kPa, 15 psi)
 

 

Part Number Description Pkg
Acrodisc PSF GxF Syringe Filters with Glass Fiber, 25 mm
AP-4527 GxF/Glass, 25 mm, AutoPack tubes 25/pkg 200/cs
AP-4523 GxF/Glass, 25 mm 50/pkg 200/cs
AP-4529 GxF/Glass, 25 mm 1000/pkg

 

 

 

LOGIN

SEARCH

MENU NAVIGATION