41.jpg

 

They are suitable for applications involving aggressive organic solvents, strong acids, and alkalis. PTFE membranes are particularly suitable for preparing samples for HPLC analysis. The hydrophobic nature of the membrane also has applications for air and gas sterilization. The membrane is laminated onto a nonwoven polypropylene support web for improved strength and handling and can be used at temperatures up to 120ºC.
Chemically stable and inert
PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes. It is resistant to most acids, alkalis, and solvents.
Applications
One of the major applications for the PTFE  membrane is the clarification of corrosives, solvents, and aggressive fluids. This includes the important requirement in HPLC analysis for sample filtration where any solid particles can cause permanent damage to the column. The 0.5 µm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 µm and 0.5 µm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 µm membranes.
WTP and TE membrane ranges
WTP membranes use a polypropylene grid as the support material whereas the TE range use a randomly arranged polypropylene support material.


 

Typical Data - Teflon (PTFE) Membranes 

Membrane Thick-
ness
(µm)
Porosity
(%)
Flow rate
Δp = 0.9 bar (s/100 ml/12.5 cm2)
Liquid flow rate @ 10 psi vacuum
(ml/min/cm2)
Air flow rate Δp = 3 mbar (s/100 ml) Air flow rate @ 10 psi vacuum
(l/min/cm2)
Bubble point (bar)‡ Max.
temp.
(οC)
TE Range
0.2 µm
(TE 35)
240 - 24* - 70 - 1.29 100
0.45 µm
(TE 36)
220 - 12* - 60 - 0.89 100
1.0 µm
(TE 37)
275 - 5.4* - 24 - 0.24 100
5.0 µm
(TE 38)
265 - 2.2* - 3.5   0.19 100
WTP Range
0.2 µm 130 72 - 61.4† - 4.5 0.89 120
0.5 µm 120 74 - 110† - 7.5 0.41 120
1.0 µm 90 76 - 445† - 17 0.21 120
* Measured with ethanol
† Measured with Acetone
‡ Measured using 2-Propanol


 

Ordering Information - Teflon (PTFE) Membranes

Catalog Number Description
WTP Range
0.2 µm Pore Size
7582-002 PTFE membrane circles, 0.2 µm, 25 mm, 100/pk
7582-004 PTFE membrane circles, 0.2 µm, 47 mm, 100/pk
0.5 µm Pore Size
7585-004 PTFE membrane circles, 0.5 µm, 47 mm, 100/pk
1.0 µm Pore Size
7590-002 PTFE membrane circles, 1 µm 25 mm, 100/pk
7590-003 PTFE membrane circles, 1 µm, 37 mm, 100/pk
7590-004 PTFE membrane circles, 1 µm 47 mm, 100/pk
TE Range
0.2 µm Pore Size (TE 35)
10411405 PTFE membrane circles, (TE 35), 0.2 µm, 25 mm, 50/pk
10411411 PTFE membrane circles, (TE 35), 0.2 µm, 47 mm, 50/pk
10411413 PTFE membrane circles, (TE 35), 0.2 µm, 50 mm, 50/pk
0.45 µm Pore Size (TE 36)
10411305 PTFE membrane circles, (TE 36), 0.45 µm, 25 mm, 50/pk
10411311 PTFE membrane circles, (TE 36), 0.45µm, 47 mm, 50/pk
10411313 PTFE membrane circles, (TE 36), 0.45 µm, 50 mm, 50/pk
1.0 µm Pore Size (TE 37)
10411205 PTFE membrane circles, (TE 37), 1 µm, 25 mm, 50/pk
10411211 PTFE membrane circles. (TE 37), 1 µm, 47 mm, 50/pk
10411213 PTFE membrane circles, (TE 37), 1 µm, 50 mm, 50/pk
5 µm Pore Size (TE 38)
10411108 PTFE membrane circles, (TE 38), 5 µm, 37 mm, 50/pk
10411111 PTFE membrane circles, (TE 38), 5 µm, 47 mm, 50/pk
10411113 PTFE membrane circles, (TE 38), 5 µm, 50 mm, 50/pk
10411116 PTFE membrane circles, (TE 38), 5 µm, 90 mm, 25/pk
10411130 PTFE membrane circles, (TE 38), 5 µm, 150 mm, 25/pk

 

 

LOGIN

SEARCH

MENU NAVIGATION